I realized the other day that I only had a couple of bars of lavender soap left, with a big selling event coming up! I haven’t been making much soap lately because my inventory is pretty full so it was fun to finally make a new batch. I took a few photos of the process and the outcome to share here.

First- here are the measured and melted solid oils next to the liquid oils, ready to be mixed. In this batch I used palm and palm kernel flakes for the solids and olive and castor oils for the liquid.

Meanwhile  a mixture of lye, salt, sugar and water sits in an ice water bath to bring the temperature down. The lye water and the oils should be nearly the same temperature when they are combined. I’m usually too impatient to wait and end up soaping hot. Doesn’t seem cause a problem most times, unless I’m using a touchy fragrance oil that might speed things up.

Here the oils are mixed with the lye solution and I’ve added some grape pop mica which is a skin safe colourant. It makes fantastic bright colours in soap.  I added a little pearl whte mica as well because I thought I added a little too much grape. Sorry this photo is out of focus and the doorframe reflection doesn’t help!

At this point I didn’t stop to take any photos, but I separated some of the batch into another container and added more grape mica for a deeper purple, then I mixed both bowls with my stick blender to thicken them to a medium trace. I wanted the bars to be swirled with the 2 shades of purple, so I poured the darker soap back into the main batch and mixed once or twice, then poured it into the waiting mold. I saved a bit of the darker soap to pour on top and add a bit of swirls using a cardboard coffee stir stick.

Here’s how it looked in the mold after that:

Jon made my soap molds so they would fit perfectly inside the oven. I nearly always oven process my soap for one hour at 170 F, then shut the oven off and leave the soap in the oven overnight. It’s ready to cut first thing in the morning. The only soaps I don’t oven process are my milk or honey recipes since they can heat up pretty well on their own. I usually leave my individually molded soaps like the cupcakes or hearts out to set at room temperature as well.

Here’s how this lovely lavender loaf looked after I unmolded it the next day. I was kind of bummed that the colour faded.  Too bad – I would have liked more contrast between the two shades.

…and here it is about to be sliced into bars with my handy dandy craftman soap cutter. This cutter is awesome- eight perfectly straight cuts in one go. I love this little gadget.

Finally, here are the cut bars all ready for the curing rack. They will air dry on the racks for 4-6 weeks for the excess water to evaporate. The soap gets better and better as it dries out and ages.The curing time also ensures a hard bar that will last a long time. Aren’t they pretty? They smell great too. Lavender is a scent that has grown on me since I started making soap. It really is very soothing and relaxing.